Onicon F-1100 Series Uživatelský manuál stáhnout pdf (Strana 44)

11451 Belcher Road South, Largo FL 33773 • USA • Tel +1 (727) 447-6140 • Fax (727) 442-5699 • [email protected]

Turbine Flow Meter Manual 05/14 - 0721-3 / 13518 Page B-5

11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax (727) 442-5699

www.onicon.com • [email protected]

0881-1 / 20082

04-14

Installation Hardware Instructions

Standard Installation Kit For 1” Copper Tube

(Complies with NSF61)

For F-1100 Series Insertion Turbine Flow Meters

This kit must be installed prior to lling the system, or into a section of pipe that is isolated from

pressure and ow. Once installed, this kit allows for insertion and removal of the ow meter without a

system shutdown.

For Use With Kit INSTL3 (1”)

Directions:

1. Identify an appropriate location for the ow meter

(see next page).

2. Solder or braze the copper tee and adapters provided.

3. Install the ball valve as shown below. Use a paste type

thread sealant. DO NOT use Teon

tape.

4. Flush and ll the system prior to installing the meter.

NOTE: Before installing the ow meter, read the entire

installation manual.

Important Note

ONICON insertion ow meters

are precision measuring devices

that must be installed according to

the instructions contained in this

document in order to maintain their

accuracy and reliability. Failure to

follow these instructions will result

in erratic operation and reduced

accuracy.

INSTALLATION KIT COMPONENTS

1” COPPER 1¼” - 1” REDUCER 1” STREET 1” FULL PORT

TEE WITH BUSHING ADAPTER BALL VALVE

1¼” OUTLET

(see Sections 3.1 and 3.2).

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 52 53

Žádné komentáře

Onicon F-1100 Series Uživatelský manuál Strana 44